Top 10 Ottie Car Mount Adhesive Pad – Cell Phone Automobile Accessory Kits

As an Amazon Associate I earn from qualifying purchases.

1. iOttie

#ad

IOttie Adhesive Dashboard Pad for Car Mounts Dashboard Pad

#ad
iOttie #ad - Please note: consumers may receive sku acdpiO301 or ACDPIO201_01, please note they are the same product! We strongly recommend using a Dashboard Pad to prevent possible damage that may occur if you apply suction cup directly to your dash. This is a semi permanent solution; each pad is one time use only. Sticks to dashboard with high quality semi permanent acrylic tape. Acrylic tape sticks to almost all textured and curved surfaces. Compatible with all iOttie Dashboard Mounts for smartphones. Once removed, it may not be reusable.
BrandiOttie #ad
ManufactureriOttie #ad
Height0.16 Inches
Length3.1 Inches
Width3.1 Inches
Part NumberACDPIO201_01
ModelACDPIO301_01
Warranty2 year manufacturer

2. APPS2Car

#ad

3 Pack Dashboard Pad Mounting Disk for Suction Cup Phone Mount & for Tom Tom Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 70mm Diameter 3 Pcs

#ad
APPS2Car #ad - Upgrade 3m sticky tapes, to provide smooth, glass-like surfaces for pedestals of suction cup car mounts to work more effectively. No tools required for installation. Has a diameter of around 2. 76 inches, applicable to most suction cup GPS/mobile holders on the market. 3m pe foam adhesive at the bottom can be fixed on textured surfaces. Buy with confidence as every APPS2Car product comes with life time customer service.
BrandAPPS2Car #ad
ManufacturerWiiki-Tech #ad
Height0.06 Inches
Length2.9 Inches
Width2.9 Inches
Part NumberS00
ModelS00

3. AZXYI

#ad

Very High Bond Sticky Adhesive, Double-Sided Stickers for Suction Cup Dashboard Phone Holder & Windshield Car Mount, AZXYI 6 Pack Dashboard Pad Mounting Disk Adhesive Replacement Kit

#ad
AZXYI #ad - Easy to useto maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. It also resists heat and moisture, easy peels off without leaving any sticky residue behind.

After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard/ windshield. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, camera mount, EZ Pass/I-Pass/SunPass holder, ETC, wireless charger base, dash camera mount holder etc on the market. When using, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, first easily peel off the white release film, then peel off the other red side film and stick to your car dashboard. Press down repeatedly to increase the contact of the adhesive with the substrate.

You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup. And wait at least 24 hours to use after stuck. 6pcs clear adhesives replacementazxyi offers 6 pcs round clear sticky adhesive padsDiameter: 80mm, 3. 15" for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. Very high bond & easy to removethese high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond, and protects adhesive surfaces against scratches, bonding almost instantly with no drying time.
BrandAZXYI #ad
ManufacturerAZXYI #ad
Height0.04 Inches
Length3.15 Inches
Width3.15 Inches
Part NumberAZXYI-6DR
ModelAZXYI-6DR

4. PKYAA

#ad

PKYAA 6pcs 2.1"53mm Circle Heat Resistant Double-Sided Stickers for Suction Cup Car Phone Holder Disc & Windshield Dash Cam, Dashboard Pad Mounting Disk Sticky Adhesive Replacement Kit

#ad
PKYAA #ad - Extra strong both side clear adhesion pads's stickiness is 40% stronger than ordinary sticky adhesive. Easy to fix your car phone socket base, truck, you can stable and secure driving uber, heavy duty dashboard mount base, vehicle in bumpy roads. Package includes6 x2. 1"53mm round sticky adhesive.

Please wait 24 HOURS to use. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard. Press down repeatedly to increase the contact of the adhesive with the substrate. 6pcs clear adhesives replacementpkyaa offers 6pcs round clear sticky adhesive padsDiameter: 2. 1"/53mm, for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. It also resists heat and moisture, double-sided adhesive pads let you quickly and easily create a long-lasting bond, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.

Please do not hesitate to contact us and we will provide you our best after-sale service. Easy to removethese high-strength, bonding almost instantly with no drying time. High temperature resistance sticky adhesivethese stickers have high temperature120℃+ resistance performance. Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads.
BrandPKYAA #ad
ManufacturerPKYAA #ad
Height0.03 Inches
Length2.09 Inches
Width2.09 Inches
Part NumberPKYAA-PK6MRST
ModelPKYAA-PK6MRST

5. PKYAA

#ad

Dashboard Pad Mounting Disk Sticky Adhesive Replacement Kit, PKYAA 3pcs 2.76"70mm Circle Heat Resistant Double-Sided Stickers for Suction Cup Car Phone Holder Disc & Windshield Dash Cam

#ad
PKYAA #ad - Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. Please wait 24 HOURS to use. When using, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, first easily peel off the white release film, then peel off the other red side film and stick to your car dashboard.

You can use it without worry in hot Summer. 3pcs clear adhesives replacementpkyaa offers 3pcs round clear sticky adhesive padsDiameter: 2. 76"/70mm, for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup. Extra strong both side clear adhesion pads's stickiness is 40% stronger than ordinary sticky adhesive. It also resists heat and moisture, double-sided adhesive pads let you quickly and easily create a long-lasting bond, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.

Press down repeatedly to increase the contact of the adhesive with the substrate. Easy to removethese high-strength, bonding almost instantly with no drying time. High temperature resistance sticky adhesivethese stickers have high temperature120℃+ resistance performance. Easy to fix your car phone socket base, truck, heavy duty dashboard mount base, you can stable and secure driving uber, vehicle in bumpy roads.
BrandPKYAA #ad
ManufacturerPKYAA #ad
Height2.76 Inches
Length2.76 Inches
Weight0.03 Pounds
Width0.04 Inches
Part NumberPKYAA-3DPS
ModelPKYAA-3DPS

6. OQTIQ

#ad

95mm Diameter, Van, Replacement Heat Resistant Stickers for Car, 2 Pcs, GPS Suction Mount, OQTIQ Sticky Adhesive Mounting 3M Pad for Dashboard & Suction Cup Car Phone Holder, Truck

#ad
OQTIQ #ad - The pads fit for the most suction cup holders, suitable for trucks, and any vehicles on bumpy roads. Easy to install and remove: you can peel the red film of this pad easily by the raised label, then stick the adhesive pad on your dashboard with some pressure to enhance the connection between the pad and the dashboard, and wait for 24 hours to use.

Sticky adhesive pad: when you are worried about your suction cup holder not strong enough to stand on the car dashboard, you might want this 3M adhesive pad to help you out. Ultra big size: 95mm diameter, it fits the oqtiq car phone mount perfectly also suitable for GPS car mount. Also, this 3m pad fits all kinds of suction cups because of its ultra big size. Heat-resisting: the 3m adhesive stickers have extremely strong heat resistance and can be used at high temperatures, cars, you don’t have to worry about whether they will melt under the sun.

If you need to take the pad off your dashboard, it won’t leave scratches and any residues behind. If you have a holder of a similar size, the adhesive pad might suit you too. It’s sticky, which makes your holder firmly stand on your dashboard. Package: there is a pack including 2 adhesive pads.
BrandOQTIQ #ad
ManufacturerOQTIQ #ad

7. volport

#ad

Very Strong Sticky Adhesive, Double Sided Stickers for Suction Cup Dashboard Phone Holder & Windshield Car Mount 2 Pack, 2.76in/70mm VOLPORT Dashboard Pad Mounting Disk Adhesive Replacement Kit

#ad
volport #ad - All we want is your satisfaction. We provide a one-year warranty and if you need any help with our product, 4 x alcohol pads, please do not hesitate to contact us and we will provide you our best after-sale service. Universal compatibilityself sticky gel mounting disc 70mm fits any suction cup style accessories, toy, mirror, wireless charger base, windshield cell phone holder, electronics, monitor, alarm sensors, car tablet stand, monitor, to solve the problem of suckers falling off.

Applicable dash suction cup phone mount, backup camera, assortment, radar detector mount, action camera, suitable for various dashboard surfaces and windshields, gps navigation bracket, decoration, outdoor camera mount, idol. Easy to remove these circle high heat double sided suction cup sticker backing mounting disk is easy to remove, you can remove it without leaving adhesive residue, will not damage the dashboard surface, no tool required. Package includes2 x 2. 76 inch 70 mm diameter double face heat resistance round dashboard pad mounting disk, 1 x user manual.

Important tips: these adhesive pads only compatible with holder cup around 70mm and must wait at least 24 hours before use to increase adhesion. Best car cellphones mount adhesive attachment replacement. Genuine 3m sticky self-adhesive dots these phone dashboard car mount back stickers have high temperature120℃+ resistance performance, you can use it without worry in hot summer, heavy duty dashboard mount base, car phone base, you can stable and secure driving truck, even in Texas. Easy to fix your Navigator bracket, vehicle in bumpy roads.
Brandvolport #ad
Manufacturervolport #ad
Height0.39 Inches
Length7.08 Inches
Width3.54 Inches
Part NumberV-C1AC-N

8. Galundge

#ad

GPS, Car Phone Mount, 80mm3.15 inches Transparent Double-Sided Sticky Pad Windshield Mount Adhesives for Dashboard Mounting Disk and Windshield Camera, 9 PCS Adhesives Pads for Suction Cup Mount

#ad
Galundge #ad - Note: 1. Adhesive can only be used once. We take care of all after-sale service. 2. No directly adhere to silicone items. Press down repeatedly for 5-10 minutes to increase the contact of the adhesive with the substrate. It also resists heat and moisturealmost instantly with no drying time, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.

Very high bondto maximize adhesive contact with adhesive, clean the adhered surface choosen ahead of time and suction mount base, let them dry and free of contaminates. What you get galundge provides 9pcs dashboard stickers. Easy to installprovided rounded rectangle raised label to easily peel off the white release film of the adhesive pads. 9pcs sticky adhesives for suction cup mountgalundge 9pcs double-sided sticky pads are worked for dashboard Suction Cup Mount.

Strong sticky and durabilitygalundge's very high bond adhesives let you quickly and easily create a long-lasting bond, bonding almost instantly. Note: the package not include the mounting disk. Please ensure that the required surface is clean and dry before applying the adhesive pads. Your satisfaction is our top priority. Please wait 24 HOURS to use. If you have any questions about our suction cup adhesive by 24 hours of the day to solve your problems.
BrandGalundge #ad
ManufacturerGALUNDGE #ad

9. TORRAS

#ad

TORRAS Adhesive Sticky Pad Mounting Disk for Car Dashboard, Suction Cup Pad for Cell Phone Holder Car Mount with 80mm Diameter-One Pack

#ad
TORRAS #ad - What to note : please don't touch the adhesive with your finger. Protect your car from damage: if you frequently pick up the suction cup from the dashboard, it may damage your car as the time gone, but use the sticky pad, it protects your car from damage.

Also, if you have a smaller suction cup than this size, that still works perfectly. Everything is perfect! Now, which is not stronger, you never worry about it anymore. Premium sticky pad: when you want a dashboard car phone mount, with the adhesive pad, maybe you are worried about the suction cup of your car mount, maybe you also afraid that your car dash does not accept to the suction cup of the holder. Size : the diameter: 80 mm3. 15 inches, torras 2in1 car phone mount would be suitable for it very well. Package : 1 x sticky pad. Select a certain place to install, then don't move again.
BrandTORRAS #ad
ManufacturerTORRAS #ad
Height0.04 Inches
Length3.5 Inches
Width3.5 Inches
Part NumberTS-3-STPD-US

10. pop-tech

#ad

3M VHB Sticky Adhesive Pad Replacement for Dashboard/Windshield/Dash Cam Suction Cup Mount, 80 mm/3.15" Circle Double Sided Self Stickers Improve Disc Suction for Camera/GPS/Car Phone Sucker Holders

#ad
pop-tech #ad - All we want is your satisfaction. Dual suded round adhesive works on the dashboard, imac screen. Let your hands free. Widely applicable. Used for various suction cup holder mount exclusively designed for diameter of 3. 15 inch 80 mm suction disk mounting plastic plate, compatible with dashboard & dash cam holder.

Easy installation simple several installation steps can be easily completed. Please do not hesitate to contact us if you have any questions about our suction cup adhesive and our customer service team is stand by 24 hours of the day to solve your problems. 100% satisfactory service we provide 12-month warranty and lifetime technical support for best after-sale service. You can also cut it to fit the size of your small device.

It can be easily removed and cleaned, leaving no residue on the surface. Application wide range suitable for clean & flat, and some textured or wet surfaces, metal, handsoaps dudel dispenser, suitable for dashboard suction cup phone holder, windshield, even in the kitchen. High temperature resistance selection of high-quality Genuine 3M adhesive pad, double-sided self-adhesive, provides strong and durable support, high/low temperature resistant, stronger than ordinary glue patches.
Brandpop-tech #ad
Manufacturerpop-tech #ad
Height0.05 Inches
Length3.15 Inches
Width3.15 Inches