As an Amazon Associate I earn from qualifying purchases.
Aquatic AV #ad - Connects to existing factory stereo connectors. Plug and play installation. Replaces factory radio on 98-13 H-D models. Device charging when connected via USB.
Metra Electronics #ad - Iso stacked radio provision, cadillac, it is compatible with Buick, high grade abs Plastic, Chevrolet, gmc, oldsmobile, Easy to use Instructions, Pontiac and Isuzu Select Models.
Install dash kit for Double DIN/ISO Radios. Painted to match factory dash color. Install dash kit for Double DIN/ISO Radios. Factory style Texture. Painted to Match Factory Dash Color. Factory style texture.
Planet Audio #ad - A low-pass filter will primarily keep high notes out of your subwoofers. Low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac15001m with the source unit.
High level inputs: speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the ac15001m to your factory radio or aftermarket radio that does not have low-level rca inputs.
Most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers. Maximum power output of 750 watts at 4 ohms into one channel. Low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. Variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it.
Rockford Fosgate #ad - 6 cut connector for secure fit. Split center pin for secure connection|Great sound transfer|OFC Oxygen Free Copper for corrosion resistance|Platinum plated ends for corrosion resistance|.
BOSS Audio Systems #ad - 20 4" wire ties, 4 rubber grommets. 20 foot/ 4 gauge red power cable, high quality gold Plated competition agu fuse. Gold plated agu in-line fuse holder, 3 foot/ 4 gauge black ground cable.
BOSS Audio Systems #ad - Class ‘b’ amplifiers have no current flowing through its outputs with no audio signal. Specs - dimensions: 9. 13” x 1044” x 2. 25”, weight: 4. 43 lbs. Frequency response: 9 hz to 50 khz, s/n ratio: 102 db, thd @ RMS Output: 0.01%, speaker impedance: 2 to 8 ohm, Fuse Quantity: 1 30 Amp ATO Blade.
Power - 1100 max x 1 @ 2 ohms, 550 max x 1 @ 4 Ohms. Variable low-pass crossover - subwoofers reproduce sound based on a number of different low-range frequencies. Warranty - boss audio systems provides a 6 year Platinum Online Dealer Warranty for purchases through Amazon.
Variable input gain control - the gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier. Low & high level inputs - a low level rca input is measured in voltages. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry. A high level +/- wire input is measured in wattages.
Scosche #ad - No need to remove the car stereo. Speaker to rca converter - converts car stereo output speaker wire to RCA connectors. Easy installation - add an amplifier to nearly any stock stereo with this line out converter. The rca line output converter for subwoofer makes it easy to hook up to an amplifier and set up a subwoofer system in any car.
Subwoofer - this diy speaker kit is a convenient speaker wire to subwoofer adapter. Includes signal sensing 12V remote turn-on output. This remote bass knob lets you control the level of sound with convenience.
This speaker wire line out converter is compatible with high power car stereos up to 90 watts per channel. Delivering premium performance without noise, static, or buzzing. Simply tap into the car audio speaker wire with snap adapters. Rca converter - speaker level to line level converter allows the addition of 2-channel or mono amplifiers. Independent left and right channel level adjustments provide the perfect sound balance.
Pyle #ad - High-level rca output: the 2 channel speaker to RCA converter takes a low-level input and converts it to a high-level input and converts it to a high-level RCA output. Aluminum Housing. Level adjustable - dimensions: 3. 6''l x 2. 6''w x 1. 08''h. Max input: 50W. 2 channel hi/low level rca converter - 2 x Female RCA Outputs.
Made to last: the pyle audio connector is equipped with an exclusive aluminum housing for long lasting protection even after repeated use and it fits perfectly to any device and doesn't get easily disconnected by light tugging or dragging.
Perfect for on stage or in a studio use. It is designed to connect or integrate your 2 channel head unit directly to your sound system. Ground loop Isolation and Noise Elimination. Minimal signal loss: features round loop isolation and noise elimination and made with precision formulated materials for maximum signal transfer and ensures optimal signal stereo audio transmission.
1. Aquatic AV
#adAquatic AV MP5 Replacement Radio for Harley 1998-2013 Touring Models
#adMore information #ad
Supports bluetooth, USB and MP3 devices. Note: if you have a harley-davidson CVO model please contact the manufacturer Aquatic AV for Technical Support check compatibility before purchasing.| Brand | Aquatic AV #ad |
| Manufacturer | AQUATIC AV #ad |
| Height | 4 Inches |
| Length | 9 Inches |
| Weight | 0.63 Pounds |
| Width | 6 Inches |
| Part Number | AQ-WR102F |
| Model | AQ-WR102F |
| Warranty | 2 Year Warranty |
More information #ad
2. Metra Electronics
#ad2012 GM Vehicles, Metra Electronics 95-2001 Double DIN Installation Dash Kit for Select 1994
#adInstall dash kit for Double DIN/ISO Radios. Painted to match factory dash color. Install dash kit for Double DIN/ISO Radios. Factory style Texture. Painted to Match Factory Dash Color. Factory style texture.
More information #ad
High-grade ABS plastic construction. Designed and manufactured with Precision Tolerances, Resulting in a Gapless fit between the Dash and the Kit. Included components: double din brackets, Screws 3, Double Din Trim Plate, Spacers, Speed Clips 3. Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit.| Brand | Metra Electronics #ad |
| Manufacturer | METRA Ltd #ad |
| Height | 8 Inches |
| Length | 15.5 Inches |
| Weight | 0.75 Pounds |
| Width | 1.2 Inches |
| Part Number | 952001 |
| Model | 952001 |
| Warranty | 1-year Manufacturer's Warranty |
More information #ad
3. Rockford Fosgate
#adRockford Fosgate RFI2SW High Level RCA Input Plug
#adRockford Fosgate #ad - Split center pin for secure connection. Male rcA jacks. Ofc oxygen free Copper for corrosion resistance. This is not an output line converter.More information #ad
Platinum plated ends for corrosion resistance. This high level speaker wire to RCA adaptor is an economic way to connect a factory OEM source unit to an amplifier.| Brand | Rockford Fosgate #ad |
| Manufacturer | Rockford Fosgate #ad |
| Height | 1.5 Inches |
| Length | 6 Inches |
| Weight | 0.12 Pounds |
| Width | 7.5 Inches |
| Part Number | RFI2SW |
| Model | RFI2SW |
| Warranty | 1 year |
More information #ad
4. Rockford
#adRockford RFHLC High Level Speaker Signal to Low Level RCA Adapter
#adRockford #ad - Package weight: 1. 0 lbs. High to Low Adapter. Speaker level to RCA. Rockford fosgate rf-hlc high level speaker signal to low level RCA Adapter.More information #ad
| Brand | Rockford #ad |
| Manufacturer | Rockford Fosgate #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Width | 0 Inches |
| Part Number | RFHLC |
| Model | RFHLC |
More information #ad
5. Planet Audio
#ad1500 Watts Max Power, Remote Subwoofer Control, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Planet Audio AC1500.1M Monoblock Car Amplifier
#adHigh level inputs: speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the ac15001m to your factory radio or aftermarket radio that does not have low-level rca inputs.
More information #ad
Power: max power output of 1500 watts at 2 ohms into one channel. This amplifier is designed to run your subwoofers giving them the power that they need to perform as they were meant to. Most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers. Maximum power output of 750 watts at 4 ohms into one channel. Low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. Variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it.
| Brand | Planet Audio #ad |
| Manufacturer | Planet Audio #ad |
| Height | 2.4 Inches |
| Length | 10 Inches |
| Weight | 6.69 Pounds |
| Width | 10 Inches |
| Part Number | AC1500.1M |
| Model | AC1500.1M |
More information #ad
6. Rockford Fosgate
#adRockford Fosgate RFI-10 Twisted Pair Signal Cable -10 feet,Black
#adMore information #ad
Rfi and emi noise rejection|Frosted outer sheild for durability and flexibility|1 Year|Standard Warranty. Dual twist design for excellent noise cancellation. Woven outer sheild for durability. Split center pin for secure connection. 10 feet in length.| Brand | Rockford Fosgate #ad |
| Manufacturer | Rockford Fosgate #ad |
| Height | 1.5 Inches |
| Length | 7 Inches |
| Weight | 0.25 Pounds |
| Width | 6 Inches |
| Part Number | RFI-10 |
| Model | RFI-10 |
| Warranty | 1 year parts and labor. |
More information #ad
7. BOSS Audio Systems
#adA Car Amplifier Wiring Kit Helps You Make Connections and Brings Power to Your Radio, Subwoofers and Speakers, BOSS Audio Systems KIT10 4 Gauge Amplifier Installation Wiring Kit
#adMore information #ad
5/16" gold-plated ring terminals, 1/4" Gold-plated ring terminal, 4 Gold-plated speaker terminals. 16 foot/ 18 gauge blue remote turn-on wire, 30 foot 16 gauge speaker wire. 17 foot high performance RCA interconnect cable, 6 foot split loom tubing.| Brand | BOSS Audio Systems #ad |
| Manufacturer | BOSS AUDIO #ad |
| Height | 2.6 Inches |
| Length | 18.5 Inches |
| Weight | 3 Pounds |
| Width | 13 Inches |
| Part Number | KIT-10 |
| Model | KIT10 |
| Warranty | 1 Year over the counter exchange |
More information #ad
8. BOSS Audio Systems
#ad1100 High Output, 2/4 Ohm Stable, Stereo, Monoblock, Mosfet Power Supply, Low/High Level Inputs, Low Pass Crossover, Class A/B, BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier
#adPower - 1100 max x 1 @ 2 ohms, 550 max x 1 @ 4 Ohms. Variable low-pass crossover - subwoofers reproduce sound based on a number of different low-range frequencies. Warranty - boss audio systems provides a 6 year Platinum Online Dealer Warranty for purchases through Amazon.
More information #ad
Com. We strongly encourage professional installation of this product to ensure proper functionality. You can set exact sound specifications for the bass frequency reproduction. Variable input gain control - the gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier. Low & high level inputs - a low level rca input is measured in voltages. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry. A high level +/- wire input is measured in wattages.
| Brand | BOSS Audio Systems #ad |
| Manufacturer | BOSS AUDIO #ad |
| Height | 2.25 Inches |
| Length | 9.13 Inches |
| Weight | 4.4 Pounds |
| Width | 10.44 Inches |
| Part Number | R1100M |
| Model | R1100M |
| Warranty | 6 Year Platinum Online Dealer Warranty valid only on products Sold / Shipped by Amazon.com. This offer is not valid on purchases made from third party market place sellers |
More information #ad
9. Scosche
#adBlack, 2-Channel Signal Sensing Speaker Wire to RCA Adapter with Remote Control Knob, Scosche LOC2SL Line Output Converter Adjustable Amplifier Add On Module for Car Stereo
#adSubwoofer - this diy speaker kit is a convenient speaker wire to subwoofer adapter. Includes signal sensing 12V remote turn-on output. This remote bass knob lets you control the level of sound with convenience.
More information #ad
Each converter includes easy to follow instructions to simplify the installation process. No reason to pull over and manually adjust the amplifier. External controller - includes mountable remote control knob for adjusting subwoofer bass audio level from the dash. This speaker wire line out converter is compatible with high power car stereos up to 90 watts per channel. Delivering premium performance without noise, static, or buzzing. Simply tap into the car audio speaker wire with snap adapters. Rca converter - speaker level to line level converter allows the addition of 2-channel or mono amplifiers. Independent left and right channel level adjustments provide the perfect sound balance.
| Brand | Scosche #ad |
| Manufacturer | Scosche #ad |
| Height | 13.25 Inches |
| Length | 2.13 Inches |
| Weight | 0.4 Pounds |
| Width | 6.63 Inches |
| Part Number | LOC2SL |
| Model | LOC2SL |
| Warranty | Lifetime Limited Warranty |
More information #ad
10. Pyle
#adPyle PLVHL60, Aluminum Housing, 2-Channel Speaker to RCA Converter, Adjustable level, 50W Max Input, 2 Channel Hi/Low Level RCA Converter w/ Ground Loop Isolation and Noise Elimination
#adMade to last: the pyle audio connector is equipped with an exclusive aluminum housing for long lasting protection even after repeated use and it fits perfectly to any device and doesn't get easily disconnected by light tugging or dragging.
More information #ad
Level adjustable: pyle link line out converter has a built-in level button control and smooths out your signal for output to an amplifier. High-quality sound: no need to worry about interrupted sound, static or loss of quality during an important event because this cable is made with highly durable construction and delivers premium performance without noise, static, or buzzing. Perfect for on stage or in a studio use. It is designed to connect or integrate your 2 channel head unit directly to your sound system. Ground loop Isolation and Noise Elimination. Minimal signal loss: features round loop isolation and noise elimination and made with precision formulated materials for maximum signal transfer and ensures optimal signal stereo audio transmission.
| Brand | Pyle #ad |
| Manufacturer | Sound Around #ad |
| Height | 2.5 Inches |
| Length | 9 Inches |
| Weight | 0.2 Kilograms |
| Width | 5.5 Inches |
| Part Number | PLVHL60 |
| Model | PLVHL60 |
More information #ad
