Micro Sol Setting Solution, 1 oz by Microscale Industries


Microscale Industries BMF128 - Make sure the surface is free of particles that could get under the decal's film and cause a blemish. Then allow the decal to dry without disturbing it. Following these simple instructions will result in a model with professional looking markings. It does the work. The most amazing results in seemingly impossible places are possible because Micro Sol actually makes the decal part of the painted surface.

Then, when everything is dry enough that the decal will not move easily, apply Micro Sol with a small flat brush. Micro sol setting solution is for the most difficult irregular surfaces to be found on models. Do not touch until the decal has dried, as the decal is very soft at this stage and could be easily damaged.

Micro Sol Setting Solution, 1 oz by Microscale Industries - For the best results, first apply Micro Set to prepare the surface and enhance the adhesive. It completely softens the microscale Decal, allowing it to drape down onto the surface of the model, conforming perfectly to surface irregularities without distortion. One application is enough in most cases but, if necessary, a second application of Micro Sol can be helpful.

Apply with as few strokes as possible so as not to disturb the decal. Microscale bmf128 micro Sol setting solution MSSOL. For that reason you should coat Micro Sol on for only a few seconds and then leave it alone.

More information about Microscale Industries BMF128

Micro Set Setting Solution, 1 oz


Microscale Models - Micro set should be applied to the surface of the model where you will be sliding the decal off the paper backing. In addition, micro set slightly softens the decal film to make it more flexible so that it will conform better to the model's surface. This is a one ounce bottle of Microscale Industries Micro Set Setting Solution.

Micro set prepares the surface with special wetting agents that cut the oils in new paint and convert the adhesive on the back of the decal to a stronger and longer lasting one. Step 2 sold seperately Micro Set MI-2. Softens decals to conform to irregular surfaces. Step 1 of the two step decal system from Microscale Industries.

Micro Set Setting Solution, 1 oz - . Setting solution for decals. Better adhesion of the decal to the model prevents tiny air bubbles from forming and results in an invisible carrier film for the so-called "painted on look. Micro sol decal Softener & Setting Solution 1 oz. Micro set is a very versatile decal setting solution that does several things to Microscale Decals to improve application.

More information about Microscale Models


Similar products



Micro Mask, 1 oz


Microscale Industries MI-7 - To remove micro mask after the paint has dried, simply rub a piece of masking tape onto the Micro Mask, and then pull it quickly away. Softens decals to conform to irregular surfaces. Step 1 of the two step decal system from Microscale Industries. Irregular surfaces, any detail that you can cut with a knife - Micro Mask is your choice for all these difficult masking challenges! There is also the added bonus of paint not creeping under Micro Mask, odd shapes, unlike regular masking tape.

Setting solution for decals. Just apply it with a brush, let it dry, and cut it to any shape you want with a sharp-pointed knife. In difficult areas, applying water to the Micro Mask will soften it, and then it can be removed with an old toothbrush. Micro sol decal Softener & Setting Solution 1 oz. Step 2 sold seperately Micro Set MI-2.

Micro Mask, 1 oz - Non-toxic and enviromentally safe. Micro mask is like masking tape in a bottle. Note, more than one coat may be necessary to build up some depth in thickness making it more easily removed. Peel out the part where you want to paint, leaving an outer stencil mask, and paint with the method of you prefer. However, do not use water-based paints with Micro Mask, because it is water-soluble.

More information about Microscale Industries MI-7


Similar products



Microscale Industries MI9 Micro Kristal Klear 1 oz


Microscale Industries MSIMI9 - Micro sol decal Softener & Setting Solution 1 oz. What really makes a remarkable difference in your models is the simple fact that the clear parts can be joined to the painted parts with a completely clear adhesive. This creates a "bubble" of film that fills the opening, which dries into a very thin and clear window of scale thickness that is also strong and flexible.

Step 2 sold seperately Micro Set MI-2. Non-toxic and enviromentally safe. Micro kristal Klear, 1 oz. It changes from a milky white to clear as it dries. Moreover, which are painted, the sills, can be seen through the clear Micro Kristal Klear for the most realistic looking windows possible on a model. What the pros like best is that it works quickly and easily and stays clear.

Microscale Industries MI9 Micro Kristal Klear 1 oz - This is a one ounce bottle of Microscale Industries Micro Kristal Klear. When installing larger clear parts, paint the model first, then apply a small amount of Micro Kristal Klear along the edges to be joined, install the clear parts and let dry. As if that were not enough, paper or most combinations of dissimilar materials, if you need a super strong and flexible adhesive for wood, Micro Kristal Klear fill the bill as an adhesive, plastic, it's great!When producing small windows, simply dip a toothpick into the thick liquid and apply a little all around the edges.

First, micro kristal klear is a liquid that can be used to form very real looking small windows up to about 1/4 in size. Micro kristal klear is a flexible clear liquid plastic adhesive and model window forming material.

More information about Microscale Industries MSIMI9


Similar products



Tamiya 6mm Masking Tape with 2pcs Refill


Tamiya - Lightweight upgrade instantly enhances overall performance in handling and durability. A tape length: 18 meter. Step 2 sold seperately Micro Set MI-2. Non-toxic and enviromentally safe. Micro kristal Klear, 1 oz. Made in Japan. Micro sol decal Softener & Setting Solution 1 oz. Setting solution for decals. Important notice | made for japan market and in a Japanese retail package.

Manuals is in Japanese only. Softens decals to conform to irregular surfaces. Step 1 of the two step decal system from Microscale Industries. Micro kristal klear is a flexible clear liquid plastic adhesive and model window forming material. Tamiya 6mm maskingtape with dispenser 87030 and 2pcs refill 87033 set.

Tamiya 6mm Masking Tape with 2pcs Refill - Fits most rc cars and trucks.

More information about Tamiya


Similar products



Tamiya 87038 Extra Thin Cement Glue Fine Tip 40ml


Tamiya FBA_87038 - Setting solution for decals. Lightweight upgrade instantly enhances overall performance in handling and durability. A tape length: 18 meter. Step 2 sold seperately Micro Set MI-2. Non-toxic and enviromentally safe. Micro kristal Klear, 1 oz. Softens decals to conform to irregular surfaces. Step 1 of the two step decal system from Microscale Industries.

. Tamiya extra-thin cement micro sol decal Softener & Setting Solution 1 oz. Null. Made in Japan. Genuine Tamiya product. Micro kristal klear is a flexible clear liquid plastic adhesive and model window forming material. Tamiya 6mm maskingtape with dispenser 87030 and 2pcs refill 87033 set. Fits most rc cars and trucks.

More information about Tamiya FBA_87038


Similar products



Tamiya 87030 Masking Tape 6mm & 87031 10mm Value Set


Tamiya CECOMINOD018286 - Tamiya masking Tape is thin, very strong adhesive tape for modeling use. Setting solution for decals. Lightweight upgrade instantly enhances overall performance in handling and durability. A tape length: 18 meter. Made in Japan. Genuine Tamiya product. Made in Japan. Softens decals to conform to irregular surfaces.

Step 1 of the two step decal system from Microscale Industries. This set contains 2 types of tapes, 6mm & 10mm. It even adheres well to uneven surfaces. It's ideal when sharp and crisp lines are required. This tape will not absorb paint color, or leave unsightly marks, making it perfect for use with painted or unpainted scale plastic or radio control models.

Tamiya 87030 Masking Tape 6mm & 87031 10mm Value Set - Micro sol decal Softener & Setting Solution 1 oz. Tamiya 87030 masking tape 6mm & 87031 10mm Value Set. Step 2 sold seperately Micro Set MI-2. Non-toxic and enviromentally safe. Micro kristal Klear, 1 oz. Paint does not bleed though the tape. Null.

More information about Tamiya CECOMINOD018286


Similar products



TAMIYA 81040 Acrylic Paint Thinner X-20A 250ml bottle


Tamiya 81040 - Micro kristal klear is a flexible clear liquid plastic adhesive and model window forming material. Tamiya 6mm maskingtape with dispenser 87030 and 2pcs refill 87033 set. Fits most rc cars and trucks. Null. Lightweight upgrade instantly enhances overall performance in handling and durability. A tape length: 18 meter.

Made in Japan. Tamr8140 extra large 250ml acrylic/poly thinner x-20A Micro sol decal Softener & Setting Solution 1 oz. Softens decals to conform to irregular surfaces. Step 1 of the two step decal system from Microscale Industries. Setting solution for decals. It even adheres well to uneven surfaces, but is easy to remove.

TAMIYA 81040 Acrylic Paint Thinner X-20A 250ml bottle - Tamiya 87030 masking tape 6mm & 87031 10mm Value Set. Step 2 sold seperately Micro Set MI-2. Non-toxic and enviromentally safe. Micro kristal Klear, 1 oz. Made by tamiya usa; tamiya usa is a United States based company; parts are sourced from Global producers. Made in Japan.

More information about Tamiya 81040


Similar products



Tamiya USA TAM87177 Masking Tape for Curves 2mm


Tamiya USA 87177-000 - Made by tamiya usa; tamiya usa is a United States based company; parts are sourced from Global producers. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. This tape is available in 3 separate widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively.

Paint does not bleed though the tape. Made in Japan. Genuine Tamiya product. Softens decals to conform to irregular surfaces. Step 1 of the two step decal system from Microscale Industries. It even adheres well to uneven surfaces, but is easy to remove. Tamiya usa part number tam81040; uPC 950344996636. Null. Key featureslength of roll: 20ma soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.

Tamiya USA TAM87177 Masking Tape for Curves 2mm - Use of narrower tape is recommended for sharper curves. Overviewmasking is a job which modelers of all kinds of models in every scale must carry out, and it requires precision in order to ensure that your creation gets the perfect paint job. Masking Tape for Curves 2mm.

More information about Tamiya USA 87177-000


Similar products



Perfect Plastic Putty, 40ml


Deluxe Materials BD44 - Null. It has good adhesion and sanding properties on plastic and is easily used, even in awkward areas. Has enough elasticity to work well on curves and small edges. Micro sol decal Softener & Setting Solution 1 oz. Step 2 sold seperately Micro Set MI-2. Non-toxic and enviromentally safe. Micro kristal Klear, 1 oz.

Made in Japan. Tamiya usa part number tam81040; uPC 950344996636. Key featuresdries quickly without cracks to an ultra smooth finishFills deep cavities & takes paint easilyVery little odorOverviewDeluxe Materials Perfect Plastic Putty is a one-part, fast-drying, superfine filler with water cleanup. Very little odor.

Perfect Plastic Putty, 40ml - Lightweight upgrade instantly enhances overall performance in handling and durability. A tape length: 18 meter. Micro kristal klear is a flexible clear liquid plastic adhesive and model window forming material. Tamiya 6mm maskingtape with dispenser 87030 and 2pcs refill 87033 set. Fits most rc cars and trucks.

Made in Japan. Genuine Tamiya product.

More information about Deluxe Materials BD44


Similar products



Iwata-Medea Airbrush Cleaner 16 Oz.


IWATA-MEDEA Inc 6 500 16 - Iwata airbrushes Airbrush Cleaner 16 oz. Softens decals to conform to irregular surfaces. Step 1 of the two step decal system from Microscale Industries. Very little odor. Has enough elasticity to work well on curves and small edges. Masking Tape for Curves 2mm. Null. Fills deep cavities & takes paint easily. Made in Japan.

Genuine Tamiya product. Tamiya 87030 masking tape 6mm & 87031 10mm Value Set. A high-strength, great for cleaning any airbrush or any artist tools where acrylics, gouache, general-purpose cleaner, watercolors, inks or dyes are used. Works well on all models of airbrushes, synthetic and natural-haired paint brushes, and is excellent for use in the ultrasonic cleaning of technical pens.

Iwata-Medea Airbrush Cleaner 16 Oz. - Environmentally safe and ready to use. 448 ml, iwa650016 micro sol decal Softener & Setting Solution 1 oz. Paint does not bleed though the tape. Made in Japan. Step 2 sold seperately Micro Set MI-2. Non-toxic and enviromentally safe. Micro kristal Klear, 1 oz.

More information about IWATA-MEDEA Inc 6 500 16


Similar products