LewanSoul Digital Servo Tester Servo Controller Voltage Display


LewanSoul SG_B07485M6PH_US - Weight: 13. 8g003lb. Voltage range: 5~8. 4v. Package content: 1 x Servo Tester Dimension: 50mm*35mm1. 96in*1. 38in. You can use the knob to adjust the position manually or use the servo to return to the middle position Show the voltage of power supply Dimension: 50mm*35mm1. 96in*1. 38in weight: 13. 8g003lb how to use: 1connect the power to the tester 2Plug the servo to the servo interface.

Is positive pole, - is negative pole, s is signal port; 3the servo will rotate synchronously when you turn the knob 4You can use the button below the knob to switch the mode to return to the middle position or knob control How to wire: 1Connect the charging port of the 7. 4v lithium battery to the white terminal directly 2Or connect the power supply to the blue terminal, positive voltage 5~8.

LewanSoul Digital Servo Tester Servo Controller Voltage Display - 4v available. Two working mode: "Neutral position" and "Manual". Two types of power supply: Connect positive and negative of lithium battery; Connect charging port of lithium battery.

More information about LewanSoul SG_B07485M6PH_US

LewanSoul 6 Channel Digital Servo Tester Over-Current Protection


LewanSoul SG_B073XZH264_US - Use high-precision six potentiometers, which can control the corresponding six servos simultaneously. The voltage that the controller require should correspond to the voltage required by a servo that you controlled. The 0th, 1st, 2nd and 3rd interface have over-current protection to avoid burning out servo due to over-current.

There is a small button under each knob of controller, remove the center of the state, the knob can not control the servo rotation; then press it, the servo will return to the center of the state, press it, the knob can continue to control the servo rotation. Parameter: dimension : 76mm*53mm2. 99in*2. 09in weight: 37g 1.

LewanSoul 6 Channel Digital Servo Tester Over-Current Protection - 31oz wiring instruction +: connect 5-8. 4v power supply -:connect the power supply negative the  voltage that the tester require should correspond to the voltage required by a servo that you controlled Package Content: 1 x Servo Tester If you have any questions, please feel free to contact us at [email protected]

Com, we'll offer help to you ASAP Dimension : 76mm*53mm2. 99in*2. 09in; weight: 37g 1. 31oz.

More information about LewanSoul SG_B073XZH264_US


Similar products



Mallofusa Servo Arm Horn Metal Aluminum 25t Silvery for Rc Car Helicopter Round Mg945 Mg995 Mg996


Mallofusa - Mounting hole Spacing: approx. Suitable for hitec, parallax, Futaba and other brands 40 × 20 × 36mm standard servos. There is a small button under each knob of controller, press it, the knob can not control the servo rotation; then press it, remove the center of the state, the servo will return to the center of the state, the knob can continue to control the servo rotation.

Material: CNC Aluminium. The 0th, 1st, 2nd and 3rd interface have over-current protection to avoid burning out servo due to over-current. Pinking aperture: approx. 5. 5mm. Use high-precision six potentiometers, which can control the corresponding six servos simultaneously. 14mm. 14mm ★servo disc diameter: Approx.

Mallofusa Servo Arm Horn Metal Aluminum 25t Silvery for Rc Car Helicopter Round Mg945 Mg995 Mg996 - 20mm ★pinking aperture: Approx. 5. 5mm package included: 5 x metal Servos Mount 20 x Screws Dimension : 76mm*53mm2. 99in*2. 09in; weight: 37g 1. 31oz.

More information about Mallofusa


Similar products



LewanSoul LD-27MG Full Metal Gear Standard Digital Servo 20kg High Torque, Aluminium Case Robot RC CarControl Angle 270


LewanSoul LD-27MG - Servo disc diameter: approx. 20mm. Enhance the heat dissipation, ensure that servo motor can work well. Please use a short and thick power cord, don't use Dupont cord Dimension : 76mm*53mm2. 99in*2. 09in; weight: 37g 1. 31oz. Use high-precision six potentiometers, which can control the corresponding six servos simultaneously.

20kg large torque. 2. Full metal gear. Suitable for hitec, parallax, Futaba and other brands 40 × 20 × 36mm standard servos. Notice for use: 1. Mounting hole Spacing: approx. Specifications: Weight: 65g2. 32oz dimension: 40*20*405mm1. 57*078*1. 59inch Speed: 016sec/60°7. 4v torque:20 kg·cm 277. 6 oz·in @6. 6v working Voltage: 6-7.

More information about LewanSoul LD-27MG


Similar products



HiLetgo PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module For Arduino Robot


HiLetgo 3-01-1070 - 16-way steering gear control. 20 kg·cm 277. 6 oz·in @ 6. 6v. There is a small button under each knob of controller, the knob can not control the servo rotation; then press it, press it, remove the center of the state, the servo will return to the center of the state, the knob can continue to control the servo rotation.

Material: CNC Aluminium. Pinking aperture: approx. 5. 5mm. Voltage: dc5-10V power supply. Mounting hole Spacing: approx. Communication Interface: IIC. Can be rotated within 360 degrees when power off. Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots. 270 degree rotation.

HiLetgo PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module For Arduino Robot - Use high-precision six potentiometers, which can control the corresponding six servos simultaneously. The voltage that the controller require should correspond to the voltage required by a servo that you controlled. 14mm. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control.

Servo disc diameter: approx. 20mm.

More information about HiLetgo 3-01-1070


Similar products



4 each - 3" 6" 12" 24" JR / Spektrum / Hitec Style Servo Extension Variety Pack - Apex RC Products #1028


Apex RC Products - Communication Interface: IIC. All of our products are high quality at a great value. All pwm output lines have a 220 ohm series resistor protection and can easily drive LED. 20 kg·cm 277. 6 oz·in @ 6. 6v. Pinking aperture: approx. 5. 5mm. 20kg large torque. Can be rotated within 360 degrees when power off. Using high-precision potentiometer with new design.

Mounting hole Spacing: approx. The pca9685 chip is wrapped in the center of the board. 16-way steering gear control. Full metal gear. Servo disc diameter: approx. 20mm. Apex rc products is a company of radio control hobby enthusiasts that creates and carries products we use ourselves. Voltage: dc5-10V power supply.

4 each - 3" 6" 12" 24" JR / Spektrum / Hitec Style Servo Extension Variety Pack - Apex RC Products #1028 - Silicone wires - made With High Quality 22Awg Wire. Jr style Connectors. Dimension: 40*20*405mm1.

More information about Apex RC Products


Similar products



GoolRC HJ Digital Servo Tester / ESC Consistency Tester for RC Helicopter Airplane Car


EverTrust E-1977664138-TOM-Servo Tester - The 0th, 1st, 2nd and 3rd interface have over-current protection to avoid burning out servo due to over-current. S-3 automatic mode Automatic Keys pulse width: 1. The voltage that the controller require should correspond to the voltage required by a servo that you controlled. Aluminium case. Work with rc cars, planes, Helicopters, & Drones.

100% brand new. Search everTrust for more choices! Silicone wires - made With High Quality 22Awg Wire. All pwm output lines have a 220 ohm series resistor protection and can easily drive LED. 20 kg·cm 277. 6 oz·in @ 6. 6v. Can be rotated within 360 degrees when power off. Voltage: dc5-10V power supply. Suitable for hitec, parallax, Futaba and other brands 40 × 20 × 36mm standard servos.

GoolRC HJ Digital Servo Tester / ESC Consistency Tester for RC Helicopter Airplane Car - 125h digital the steering gear a signal cycle 8us frequency 125Hz 3. Descriptions: can be synchronized output control 4 servos and used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us 1 milliseconds = 1000 microseconds, you can test the steering gear is able to respond to subtle changes With PPM signal test function in the display, the input PPM signal changes while the input the PPM signal synchronization output to the servo Energized automatically enter manual mode Manual 20us 50H analog servo signal cycle, frequency 50Hz, rotary potentiometers to decrease or increase the width of the output pulse.

16-way steering gear control.

More information about EverTrust E-1977664138-TOM-Servo Tester


Similar products



GoTeck 1 Pair Servo Micro Analog 1.5g GS1502 Loading Two Linear Servo


Goteck - Voltage: dc5-10V power supply. 250h digital servo signal cycle 4us frequency 250Hz. Package contents: 1 Pair Micro Analog Servo. Singal: 900-2100us,frequency: 50-330Hz Motor: Coreless Motor. Speed: 012sec/60° at 3. 7v. Communication Interface: IIC. The pca9685 chip is wrapped in the center of the board. Using high-precision potentiometer with new design.

4 of each length servo Extension - 16 Extensions In Total. Servo disc diameter: approx. 20mm. Model: gs-1502 digital. Silicone wires - made With High Quality 22Awg Wire. Use high-precision six potentiometers, which can control the corresponding six servos simultaneously. Can be rotated within 360 degrees when power off.

GoTeck 1 Pair Servo Micro Analog 1.5g GS1502 Loading Two Linear Servo - There is a small button under each knob of controller, press it, the servo will return to the center of the state, the knob can not control the servo rotation; then press it, remove the center of the state, the knob can continue to control the servo rotation. Material: CNC Aluminium. Suitable for hitec, parallax, Futaba and other brands 40 × 20 × 36mm standard servos.

Dimension: 40*20*40

More information about Goteck


Similar products



LewanSoul LD-220MG 20kg High Torque Full Metal Gear Digital Servo Dual Ball Bearing, Aluminium Case, Metal Servo Horn, Metal Bracket RobotControl Angle 180


LewanSoul LD-220MG - 180 degree rotation. Voltage: dc5-10V power supply. Package contents: 1 Pair Micro Analog Servo. The voltage that the controller require should correspond to the voltage required by a servo that you controlled. Dual ball bearing: one is the driving ball bearing, one is the assistant ball bearingsupport role. Search everTrust for more choices!

Servo disc diameter: approx. 20mm. Using high-precision potentiometer with new design. 2. Full metal gear. The 0th, 1st, 2nd and 3rd interface have over-current protection to avoid burning out servo due to over-current. It's recommended that use lithium polymer battery with high rate dischargemin 5C, please don't use dry battery.

LewanSoul LD-220MG 20kg High Torque Full Metal Gear Digital Servo Dual Ball Bearing, Aluminium Case, Metal Servo Horn, Metal Bracket RobotControl Angle 180 - Jr style Connectors. Dimension: 40*20*405mm1. 57*078*1. 59inch. Singal: 900-2100us,frequency: 50-330Hz Motor: Coreless Motor.

More information about LewanSoul LD-220MG


Similar products



eBoot 12 Pieces 3-Pin Extension Lead Wire Cable Cord for Control Board Remote Control Parts, Female to Male, 320 mm


eBoot - 14mm. Model: gs-1502 digital. Specifications: Cable type: 008ts wires connector type: Futaba style connector Single cable wire length: approx. Enhance the heat dissipation, ensure that servo motor can work well. Dimension: 40*20*405mm1. 57*078*1. 59inch. 20 kg·cm 277. 6 oz·in @ 6. 6v. There is a small button under each knob of controller, the knob can not control the servo rotation; then press it, the servo will return to the center of the state, remove the center of the state, press it, the knob can continue to control the servo rotation.

Material: CNC Aluminium. Good connector: the connector of these wires are Futaba style connector with 3 pins, and it has an angle, in case you will install incorrectly, very convenient. Wide applications: these wires can be applied for Futaba and JR Servo, plane, remote control car, helicopter and drones servo connection or receiver connection.

eBoot 12 Pieces 3-Pin Extension Lead Wire Cable Cord for Control Board Remote Control Parts, Female to Male, 320 mm - Quantity: this package includes 12 pieces of female to male servo extension cable, enough for you to use. 30 cm/ 11. 81 inches total length: 32 cm/ 12. 6 inches connector color: black cable color: red, white and black Quantity: 12 pieces Package includes: 12 x Servo extension wire Dimension : 76mm*53mm2. 99in*2.

More information about eBoot


Similar products



10 pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm Helicopter Airplane Remote Control


Miuzei - Dimension: 40*20*405mm1. 57*078*1. 59inch. Use high-precision six potentiometers, which can control the corresponding six servos simultaneously. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control. 20 kg·cm 277. 6 oz·in @ 6. 6v. Communication Interface: IIC. 30 cm in length, each servo extension has 3 pieces of 0

08ts wires, universal model. Work with rc cars, planes, Helicopters, & Drones.100% brand new. Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots. 270 degree rotation. The 0th, 1st, 2nd and 3rd interface have over-current protection to avoid burning out servo due to over-current.

10 pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm Helicopter Airplane Remote Control - 20kg large torque. It's better for accuracy, service life has been greatly increased. Package contents: 1 Pair Micro Analog Servo. All pwm output lines have a 220 ohm series resistor protection and can easily drive LED. 14mm. Can be rotated within 360 degrees when power off.

More information about Miuzei


Similar products